Publicité
Les langues disponibles
Les langues disponibles
Picture Features
MENU
PICTURE FEATURES
DIGITAL VNR
DigiPure
COLOUR SYSTEM
TV
OK
1
Display MENU.
MENU
OK
2
Choose PICTURE FEATURES.
P
P
3
Display the Picture Features menu.
MENU
OK
Digital VNR
When you set the Digital VNR to ON, you can reduce the
noise on the screen to improve picture quality further.
1
Press
/
to choose DIGITAL VNR.
2
Press
/
to choose ON.
• To cancel the Digital VNR, choose OFF.
3
Press
.
OK
This completes the setting.
DigiPure
When the DigiPure is set to ON, optimum edge compensation
is applied to each portion of the same picture through digital
edge compensation. Thus, Clear and natural looking images
are obtained.
1
Press
/
to choose DigiPure.
2
Press
to choose ON.
/
• To cancel the DigiPure, choose OFF.
3
Press
.
OK
This completes the setting.
Notes:
• Set the DigiPure to ON normally.
• The DigiPure setting can be changed using the buttons
on the TV's front panel. Pressing the
seconds or longer causes the current DigiPure setting to
be displayed. Change the DigiPure setting while it is be-
ing displayed using the - / + buttons.
16
All manuals and user guides at all-guides.com
ON
OFF
OFF
ON
button for 5
Colour System
The colour system is automatically chosen, but if the picture
is not clear or no colour appears, choose the colour system
manually.
1
Press
to choose COLOUR SYSTEM. Then
/
Press
.
OK
.
COLOUR SYSTEM
PAL
TV
OK
2
Press
to choose the appropriate colour
/
system.
PAL:
PAL system.
SECAM:
SECAM system.
NTSC3.58:
NTSC 3.58 MHz system.
NTSC4.43:
NTSC 4.43 MHz system.
AUTO:
Automatic colour system selection.
Notes:
• The AUTO may not function properly with poor sig-
nal quality. If the picture is abnormal in AUTO
mode, choose another colour system manually.
• When in the TV mode (PR 1 to PR 99), you cannot
choose AUTO, NTSC 3.58 or NTSC 4.43.
• When in the TV mode (PR 0), you cannot choose
NTSC 3.58 or NTSC 4.43.
3
Press
.
OK
This completes the setting.
Publicité
