Publicité
Les langues disponibles
Les langues disponibles
SM_BLENDERFORCE-MAXI-GLASS_notice 02/10/12 17:24 Page9
All manuals and user guides at all-guides.com
Use
• Before assembling the jug (D) choose the most convenient position for the jug handle
(D4) (on the right or on the left.).
With the "clic" button (D2) of the blades block (D1) in front of you, place the positioning
clip (D3) in the assembly slot located at the base of the bowl (D4) (fig. 1 a) then bring
the blades block (D1) back to the second slot located at the front of the bowl base (D4)
(fig. 1b) until the unit is locked in place (you will hear a click) (fig. 1c).
Make sure that the bowl (D4) and the blades block (D1) are well assembled, press
the button (D2) and place the ingredients in the bowl without exceeding the maximal
level indicated on it:
* 1.5L for thick mixture
* 1.25 L for liquid mixtures
Make sure that the joint (D5) is on the lid (D6) (fig. 2 a) and place the two together
on the bowl (D4).
Put the cork (D7) in the slot destined for it on the lid top.
Place the assembled blender jug (D) on the motor unit (A), with the "clic" button (D2)
on the blade unit aligned with the "clic" button (C) on the motor unit (Fig. 2b) and
press the jug down firmly to lock it on the motor unit (you will hear a double click) (Fig
3).
Plug in the appliance, add the food and turn the speed selector (B) to the desired
position or press "Pulse" a few times.
To stop the device, bring the speed selector (B) to the "0" position. Unplug the
appliance. Unbolt the bowl (D) from the motor unit (A) by pressing the "clic" button
(C) then lift the bowl (fig. 4).
• With the herb grinder (E), you can chop ingredients like onion, garlic, meat (cut into
pieces), dried fruits and herbs in a few seconds and make crumbs (rusk, etc.). Do not
use the herb grinder for liquid preparations (fruit juices, etc.).
• With the spice grinder (F), you can grind to a powder a variety of spices spices in a
few seconds: coriander seeds, pepper, etc.
These accessories come with a lid that prevents access to the blades during use. Pour
the ingredients into the bowl (E1) or (F1). Line up the symbol t on the lid (E2) or (F2)
with the symbol s on the bowl (E1) or (F1). Fit the bowl onto the lid and turn the lid
clockwise up to
Place the assembly (E) or (F) on the motor unit, lining up the 2 ribs of the accessory with
the slots on the motor unit, with the "clic" mark on the lid aligned with the "clic" button
(C) on the motor unit (Fig 6a) and press down the accessory firmly to lock it on the
motor unit (you will hear a double click) (Fig. 6b).
to lock the assembly (Fig 5).
9
Publicité
