All manuals and user guides at all-guides.com
Label Location
The following label is located on the USB cable of the camera.
Product Symbols
Indicates the product should be used only once. The symbol is
found on the packaging for the sheaths.
This symbol on the product and/or accompanying documents
means that used electrical and electronic products should not be
mixed with general household waste.
Please refer to the written instructions of this manual.
Direct Current (DC)
The ETL listed mark indicates that Intertek has certified the product
described herein under control number 4005847 to be in
compliance with the applicable regulations. Intertek is:
• a Nationally Recognized Testing Laboratory by the Occupational
4005847
Safety and Health Administration (OSHA) in the United States.
• a Certifying Body in Canada by the Standards Council of Canada.
The CE symbol represents that the product herein specified meets
the provisions of European Council Directive 93/42 EEC concerning
medical devices and Directive 2011/65/EU of the European
Parliament and of the Council on the restriction of the use of certain
hazardous substances in electrical and electronic equipment
(RoHS).
Date of Manufacture
Manufactured for
Authorized Representative in Europe
8