Wheel Deflector
The Deflector ring can be used to help direct
the Baracuda
T5 Duo
®
TM
obstacles in the pool. Attach the ring by insert-
ing the end of the cleaner hose through the outer
ring and push the C-clip over the hose. Attached
the ring just above the first hose cuff.
Connect the Cleaner
To avoid serious injury, turn off the suction pump for the cleaner before performing this step.
1. Submerge the cleaner and
flood it with water.
2. When bubbles stop coming out
of the extension pipe, connect the
hose to the cleaner by pushing
the quick connector onto the outer
extension pipe until it locks into
position with a clicking sound.
3. Allow the cleaner to drift to the
bottom of the pool. Turn on the
pool pump and begin cleaning.
Installation is complete.
All manuals and user guides at all-guides.com
around steps and other
WARNING
7