Switching On/Off The Alarm - Yamaha TSX-120 Mode D'emploi

USING USEFUL FUNCTIONS
2 Select the beep sound.
5 kinds of beep sounds are stored on the unit.
The BEEP screen is skipped automatically if you
select MUSIC/BEEP+MUSIC in step 1.
y
You can preview the currently displayed beep sound by
pressing SNOOZE/SLEEP when you select the beep
sound. To stop the beep sound, press SNOOZE/SLEEP
again.
3 Select the music source from iPod/FM or LAST
SET.
The SOURCE screen is skipped automatically if
you select BEEP in step 1.
iPod
You can select PLAYLIST or RESUME PLAY.
The music starts from the beginning of the
playlist. Before this operation, make a playlist on
your iPod (☞ P. 7).
Select and set PLAYLIST.
Select and set the desired playlist.
Select and set RESUME PLAY when you want to
resume the music, which you listen to last time, as
the alarm sound.
FM
Set preset number/frequency.
LAST SET
Keep the setting you set last time.
6
En
Note
If the SOURCE is not set completely or the music device is
not set, the unit plays back the beep sound instead. For
example, if the unit cannot read your iPod, the beep sound
plays back.
4 Set the alarm volume.
The volume is set with ENTER in step 4, then the
alarm setting is complete. The alarm is set to on
automatically.

■ Switching on/off the alarm

You can switch on/off the alarm with ALARM1/
ALARM2, but the alarm settings are not deleted with this
operation.
Switch on/off the alarm function.
When the alarm is on, the alarm indicator and time light
up.