SilverCrest L SLL 10 A1 Mode D'emploi page 69

If you use several Bluetooth
♦
connection is disconnected . There may be a previously paired
Bluetooth
♦ Make sure that the speaker is no more than 10 metres from the
Bluetooth
are placed between them .
You cannot switch on the speaker
♦ The integrated battery in the speaker is empty . Recharge the
battery .
You cannot use all of the described functions
This may be down to your Bluetooth
♦
software . Try updating the software or using a different
Bluetooth
You hear no sound from the speaker
♦ The volume of the speaker is set to minimum . Increase the volume .
NOTE
► If you cannot solve the problem with the solutions given above,
please contact the Service Hotline (see section Service) .
SLL 10 A1
® device in range .
® device and that no obstacles or electronic devices
® device .
® devices, ensure that any previous
® device and its current
GB │ IE │ 59 ■