Samsung 3 Serie Mode D'emploi page 35

Fine Tuning Analog Channels
Use fine tuning to manually adjust a particular channel for optimal reception.
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Channel", then press the ENTER
2. Press the ▲ or ▼ button to select "Fine Tune", then press the ENTER
3. Press the ◄ or ► button to adjust the fine tuning.
To store the fine tuning setting in the TV's memory, press the ENTER
If you do not store the fine-tuned channel in memory, adjustments are not saved.
4. To reset the fine tuning setting, press the ▼ button to select "Reset",
then press the ENTER button.
Press the ExIT button to exit.
" * " will appear next to the name of fine-tuned channels.
Only analog TV channels can be fine tuned.
Checking the Digital-Signal Strength
Unlike analog channels, which can vary in reception quality from "snowy" to clear, digital (HDTV) channels have either perfect
reception quality or you will not receive them at all. So, unlike analog channels, you cannot fine tune a digital channel. You can,
however, adjust your antenna to improve the reception of available digital channels.
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Channel", then press the ENTER
2. Press the ▲ or ▼ button to select "Signal Strength", then press the ENTER
button.
If the signal strength meter indicates that the signal is weak, physically adjust your
antenna to increase the signal strength.
Continue to adjust the antenna until you find the best position with the strongest
signal.
Press the ExIT button to exit.
All manuals and user guides at all-guides.com
English - 
TV
button.
Antenna
Auto Program
button.
Clear Scrambled Channel
Channel List
Name
Fine Tune
Signal Strength
Move
Fine Tune
Air 24
button.
Reset
Adjust Save
Fine Tune
Air 24 *
Reset
Adjust Save
Fine Tune
Air 24
Reset
Move Enter
TV
button.
Antenna
Auto Program
Clear Scrambled Channel
Channel List
Name
Fine Tune
Signal Strength
Move
TV
Channel
: Air ►
►
►
►
►
►
►
Enter Return
0
Return
Fine Tuned
+
Return
0
Return
Channel
: Cable ►
►
►
►
►
►
►
Enter Return
Signal Strength
OK
Enter Return