Samsung 3 Serie Mode D'emploi page 15

Operation
Turning the TV On and Off
Press the POWER button on the remote control.
You can also use the POWER
Plug & Play Feature
When the TV is initially powered on, basic settings proceed automatically and
subsequently.
1. Press the POWER button on the remote control.
The message "Menu Language, Store Demo, Channels and Time will be set." is
displayed.
Press the ENTER button,
is automatically displayed.
2. Press the ▲ or ▼ button to select language, then press the ENTER
The message "Select 'Home Use' when installing this TV in your home." is
displayed.
3. Press the ◄ or ► button to select "Store Demo" or "Home Use", then
press the ENTER button.
The message "Select the antennas to memorize." is displayed.
We recommend setting the TV to "Home Use" mode for the best picture in your
home environment.
"Store Demo" mode is only intended for use in retail environments.
If the unit is accidentally set to "Store Demo" mode and you want to return to
"Home Use" (Standard): Press the Volume button on the TV. When the volume
OSD is displayed, press and hold the MENU button on the TV for 5 seconds.
4. Press the ▲ or ▼ button to memorize the channels of the selected connection.
Press the ENTER button to select "Start".
Air: "Air" antenna signal.
Cable: "Cable" antenna signal.
Auto: "Air" and "Cable" antenna signals.
In Cable mode, you can select the correct signal source among STD, HRC, and
IRC by pressing the ▲, ▼, ◄ or ► button, then press the ENTER
If you have Digital cable, select the cable system signal source for both Analog
and Digital. Contact your local cable company to identify the type of cable
system that exists in your particular area.
5. The TV will begin memorizing all of the available channels.
To stop the search before it has finished, press the ENTER
selected.
After all the available channels are stored, it starts to remove scrambled
channels (see page 28). The Auto program menu then reappears.
Press the ENTER button when channel memorization is complete. The
message "Set the Clock Mode." is displayed.
All manuals and user guides at all-guides.com
button on the TV.
then "Select the language of the OSD"
English - 1
Menu Language, Store Demo,
Channels and Time will be set.
menu
Select the language of the OSD.
Language
button.
Select 'Home Use' when installing this TV in your
home.
Store Demo
Move
Select the antennas to memorize.
Air
Cable
Auto
Move
Selects a cable signal type for your location.
analog
button.
STD
HRC
IRC
digital
STD
HRC
IRC
Move
Auto Program in Progress.
DTV Air : 02
DTV Cable : 2
button with "Stop"
Removing scrambled channel.
Plug & Play
Start
Enter
Plug & Play
:
English
Español
Français
Move Enter
Plug & Play
Home Use
Enter
Plug & Play
Start
Start
Start
Enter Skip
Plug & Play
Start
Enter Skip
Plug & Play
Auto Program
Air : 11
Cable : 21
Cable 0
0 %
Stop
Enter Skip
Auto Program Plug & Play
DTV Cable 41
77 %
Stop
Enter Skip