How to install your induction hob WOEP 3600?
Remove the packaging material.
•
Free the electricity supply flex from under the ap-
•
pliance and unroll it fully.
A space of 5 cm should be left between the wall
•
and the appliance.
Do not fit your wok below a shelf or near inflam-
•
mable material, such as curtains, draperies,
etc...
Plug your wok into a 16 ampere earthed socket.
•
If you use an extension lead check that it com-
plies with standards (earth connection, cross
section of conductor = 1.5 mm²).
Do not move your appliance while it is working.
•
WARNING
When your appliance is turned on, an indicator
•
light may appear.
This code is reserved for the technical depart-
•
ment, and does not concern the user.
It goes off itself after about 30 seconds or when
•
any button on your appliance is pressed.
All manuals and user guides at all-guides.com
VERY IMPORTANT
Your appliance should be placed on a clean,
horizontal, flat, stable surface which is heat
proof or else coated with a heat proof mate-
rial.
The air inlet under the appliance should not
be blocked (e.g. paper, cloths, etc.).
MAINTENANCE
About once a month, clean the filter, located un-
der your appliance, with soapy water.
When it is completely dry put it back in place
before using the appliance.
This filter is essential. It protects your applian-
ce from dust and fat.
CLEAN THE FILTER
20
To open unscrew the 2
screws