Palazzetti Ecofire Série Instructions D'utilisation Et D'entretien page 54

- MENU TYPE SHORT: WKH ÀDVKLQJ RI WKH WZR
temperature values shown on the display
indicates that the set room temperature
or water has been reached and the stove will
modulate its power to the minimum level;
- MENU TYPE ROLLING: when the set room
temperature
addition to the work parameters the message
THERMOSTAT ON will appear.
SET WATER T. (value setting range from 55° to
85°C).
IIndicates the temperature set by the thermostat
(Fig. 7.4-2). When the temperature is the same as
WKDW VHW WKH VWRYH DGMXVWV LWVHOI WR PLQLPXP SRZHU
 WR PDNH WKH DGMXVWPHQW SURFHHG DV IROORZV
when "SET WATER. T." appears, press the key
to increase the value and
SET ROOM T. (value that can be set between L
(low), 10-40°C, H (hot).
It indicates the temperature set on the thermostat
(Fig. 7.4-3). When room temperature is the same
DV WKDW VHW WKH VWRYH DGMXVWV LWVHOI WR PLQLPXP
SRZHU  WR DGMXVW SURFHHG DV IROORZV ZKHQ WKH
message "SET ROOM T." appars, press the
key to increase the value or the
)
The values set will be maintained up to the next
variation, even if the stove is off or disconnected
from the electricity supply.
MODULING
Once the temperature set has been reached, the
stove moves into modulation and will indicate
"MODULING WORK" and "THERMOSTAT ON".
During this phase the power will reduce in order
to maintain the room temperature with the least
possible consumption of energy.
54/172
USE AND MAINTENANCE
and/or water has been reached, in
to reduce it.
to reduce it.
and/
LOW 10°-11°-
Room thermostat
always active -
Stove power 1
-39°-40°
Room thermostat
Setting
excluded - Stove
the room
power as set
thermostat
cod. 00 477 1490 - 11/2013 - PN - Italy
Fig. 7.4-2
Fig. 7.4-3
HOT
Fig. 7.4-4