4.4.2. Trip reset
To reset "TRIP 1" and "TRIP 2", proceed as follows.
WARNING
This operation may only be performed while
the engine is off, the gears are in neutral, the
motorcycle is stationary, and with the feet on
the ground. Do not set the display functions
while riding as it may cause loss of control,
resulting in an accident, personal injury or
death.
Access "RUN" and press "SET" for more than four
seconds until "RUN MENU" appears.
Press "SET" for less than four seconds until "TRIP 1
RESET" appears.
OPERATION
- 75 -
4
4