MV Agusta Brutale R 2011 Manuel D'utilisation page 165

6.16.3. Replacing the high beam bulb
Remove the headlight from its support as described
in paragraph 6.16.2.
Extract the high beam bulb holder by pulling it
outwards.
Detach the burnt-out bulb from the connector.
WARNING: Lightbulb may be hot. Do not
touch the bulb glass with bare hands. Use
6
gloves to protect against burns.
Insert the new bulb in the connector.
Insert and lock the bulb holder in place by slightly
press it into the headlight housing.
Replace the headlight on its support, following the
instructions described in paragraph 6.16.2.
MAINTENANCE
- 164 -
6