MV Agusta Brutale R 2011 Manuel D'utilisation page 167

6.16.5. Replacing the license plate light bulb
Remove the cable rail fixing screws.
Pull down the cable rail and detach it from the upper
surface, operating as described in the picture.
Pull out the license plate light bulb holder.
Extract the burnt-out bulb.
WARNING: Lightbulb may be hot. Do not
6
touch the bulb glass with bare hands. Use
gloves to protect against burns.
Fit the new bulb.
Replace the bulb holder.
Push back the cable rail in touch with the upper sur-
face.
Replace the cable rail fixing screws.
MAINTENANCE
- 166 -
6