Publicité
Les langues disponibles
Les langues disponibles
eng
1.3.2. Thread types
Pipe thread, tapered right-handed
Pipe thread, cylindrical right-handed
Steel armoured thread
Bolt thread
1.3.3. Thread length
Pipe thread, tapered
Pipe thread, cylindrical
Bolt thread
1.3.4. Cut off pipe
1.3.5. Deburr inside of pipe
1.3.6. Nipple and double nipple with
ROLLER'S Nipparo (inside clamping)
with ROLLER'S Spannfix
(automatic inside clamping)
1.4. Speeds of the Work Spindles
Robot 2, Type U
Robot 3, Type U
Robot 4, Type U
automatic, continuous speed regulation
Robot 2, Type K, Type D
Robot 3, Type K, Type D
Robot 4, Type K, Type D
also under full load. On heavy duty and weak voltage for larger threads 26 rpm resp. 10 rpm.
1.5. Electrical Data
Type U (universal motor)
Type K (condenser motor)
Type D (three-phase current motor)
1.6. Dimensions (L × W × H)
Robot 2 U
Robot 2 K / 2 D
Robot 3 U
Robot 3 K / 3 D
Robot 4 U
Robot 4 K / 4 D
1.7. Weight in kg
Robot 2, Type U / U-L
Robot 2, Type K / K-L
Robot 2, Type D / D-L
Robot 3, Type U / U-L
Robot 3, Type K / K-L
Robot 3, Type D / D-L
Robot 4, Type U / U-L
Robot 4, Type K / K-L
Robot 4, Type D / D-L
1.8. Noise information
Workplace-related emissions value
Robot 2 / Robot 3 / Robot 4, Type U
Robot 2 / Robot 3 / Robot 4, Type K
Robot 2 / Robot 3 / Robot 4, Type D
1.9. Vibrations (all types)
Weighted rms value of acceleration
The indicated weighted effective value of acceleration has been measured against standard test procedures and can be used by way of comparison with another
device. The indicated weighted effective value of acceleration can also be used as a preliminary evaluation of the exposure.
CAUTION
The indicated weighted effective value of acceleration can differ during operation from the indicated value, dependent on the manner in which the device is used.
Dependent upon the actual conditions of use (periodic duty) it may be necessary to establish safety precautions for the protection of the operator.
All manuals and user guides at all-guides.com
Robot 2 Type U
Robot 2 Type K
Robot 2 Type D
R (ISO 7-1, EN 10226, DIN 2999, BSPT), NPT
G (EN ISO 228-1, DIN 259, BSPP), NPSM
Pg (DIN 40430), IEC
M (ISO 261, DIN 13), UNC, BSW
standard length
150 mm, with
re-tighten
unlimited
⅛ – 2"
¼ – 2"
⅜ – 2"
½ – 4"
53 rpm
23 rpm
23 rpm
52 – 26 rpm
20 – 10 rpm
20 – 10 rpm
230 V ~; 50 – 60 Hz; 1,700 W consumption, 1,200 W output; 8.3 A;
Fuse (mains) 16 A (B). Periodic duty S3 25% AB 2,5/7,5 min. protection class ll.
110 V ~; 50 – 60 Hz; 1,700 W consumption, 1,200 W output; 16.5 A;
Fuse (mains) 30 A (B). Periodic duty S3 25% AB 2,5/7,5 min. protection class ll.
230 V ~; 50 Hz; 2,100 W consumption, 1,400 W output; 10 A;
Fuse (mains) 10 A (B). Periodic duty S3 70% AB 7/3 min. protection class l.
400 V; 3~; 50 Hz; 2,000 W co0nsumption, 1,500 W output; 5 A;
Fuse (mains) 10 A (B). Periodic duty S3 70% AB 7/3 min. protection class l.
870 × 580 × 495 mm
825 × 580 × 495 mm
915 × 580 × 495 mm
870 × 580 × 495 mm
915 × 580 × 495 mm
870 × 580 × 495 mm
Machine
Tool set
75
12
87
12
87
12
Machine
Tool set
½ – 2"
79
12
108
12
108
12
Machine
Tool set
½ – 2"
81
12
108
12
108
12
L
+ L
83 dB (A) K = 3 dB
pA
WA
L
+ L
75 dB (A) K = 3 dB
pA
WA
L
+ L
72 dB (A) K = 3 dB
pA
WA
< 2.5 m/s²
Robot 3 Type U
Robot 3 Type K
Robot 3 Type D
standard length
150 mm, with
re-tighten
unlimited
¼ – 4"
¼ – 4"
⅜ – 2"
½ – 4"
Subframe,
mobile
16
16
16
Tool set
2½ – 3"
23
16
23
16
23
16
Tool set
2½ – 4"
25
16
25
16
25
16
K = 1.5 m/s²
eng
Robot 4 Type U
Robot 4 Type K
Robot 4 Type D
standard length
150 mm, with
re-tighten
unlimited
¼ – 4"
¼ – 4"
⅜ – 2"
½ – 4"
Subframe,
mobile and folding
22
22
22
11
Publicité
