Tristar MW-2905 Manuel D'utilisation page 61

11. Automatic start
Note: Always set current clock before you program the automatic start function.
Example: you hope that the microwave oven will
automatically start cooking with100P microwave power for
12 minutes and 30 seconds at 14:20clock.
Touch:
1.
Set current time
2.
Set cook power
3.
Set operation time
4.
Hold Preset clock for 3
seconds, then a short bee sound
will be heard.
Display will return current clock,
then set your delay time.
5.
Enter what time you expect to
start .A long bee sound will be
heard
6.
Touch the Preset clock for
viewing preset time
Note: Automatic starting function is not applicable for
Express, auto cook and defrost.
12. Multi-stage cooking (Only for XB2615CG)
For best results, some recipes need different cook menu during different stage of cook cycle.
You can program your oven to switch from one power menu to another.
Example: you want cook food with 100p microwave power for 3 minutes then grill food for 9 minutes
Touch
1.
Set cook power
2.
Set cooking time
3.
Set cook power
All manuals and user guides at all-guides.com
Display shows： ： ： ：
Display show
If you do not want the oven start operation
immediately you can activate the
automatic start function as follows:
First set the current clock, cooking
procedure and time.
And hold down the Preset Clock pad for
3 seconds and LED will show colon. Enter
the time you expected set current time to
start by pressing the keypad. Later LED
will show the current clock and the oven
will be started automatically at your preset
time.
Preset time can be viewed by depressing
the Preset Clock button.
Once the Automatic start function has
been activated:
* Pressing the Instant/Start pad if you
intend to operate the oven immediately;
* Pressing the Stop/Clear pad if you
intend to cancel this function.
Touch
4.
Set cooking time
5.
When microwave power cooking is finished,
microwave oven will begin grill operation
automatically.
Note: Max 4 sequence can be set per time
repeat the steps 1, 2, if you like to set more.
Display show