Kubota F2880 Instruction Pour Le Montage page 8

6
BFitting the Mower Linkage 2
1. Attach the lift link (9) to the right and left links (1 and 2)
and the lift arm with the two joint pins (5 and 6), three
plain washers (7) and two split pins (8).
2. Attach the lift spring (10) and lift spring rod assembly
(11), each for right and left.
3. Mount the cover (12) to the lift link (9) by joint pins (13),
plain washers (7) and split pins (8).
All manuals and user guides at all-guides.com
L) LEFT HAND: 70 mm
RIGHT HAND: 50 mm
BSecuring the Seat
C Fitting the seat
1. Connect the wire harness (2) to the OPC switch
behind the seat (1).
2. Put the four plastic collars (3) in between the seat (1)
and seat base (4). Apply the four bolts (5) in place.
A Use the plastic collars (3) and the bolts (5) assembled
to the seat.
3. Connect the seat wire harness (2) to the main wire
harness (6) of the machine.
4. Mount the center fender cover (7) to the fender with
two M14 bolts (8) and two plain washers (9).