Kubota F2880 Instruction Pour Le Montage page 6

4
ASSEMBLY
BRemoving the Battery
Take out the Battery.
Charge the battery as indicated in the operator's manual.
To avoid personal injury:
A Thoroughly read the operator's manual before
charging.
A Insufficient charging will cause the battery to run down
quickly, resulting in premature battery failure.
BFitting the Mower Linkage 1
Align the axial center of right and left links (1) with that of
outer link stay (2). Fix the shaft fulcrum (3) with the M12
tap bolts (4) (one on each side).
All manuals and user guides at all-guides.com
BAttaching the Weight
1. Secure the rear cover (1) and the plate (11) to the
2. Place the weight (3) on the rear cover. Fix the weight
3. Place the auxiliary weight on the weight (3). Fix the
machine with the two bolts (2) as shown in the figure
below.
with the two spring washers (4), two plain washers (5)
and two nuts (6).
auxiliary weight (7) with the two bolts (8), four plain
washers (9) and two nuts (10).