Télécharger Imprimer la page

Oregon ST250 Manuel D'instructions page 15

Masquer les pouces Voir aussi pour ST250:

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 31
All manuals and user guides at all-guides.com
OREGON® CORDLESS TOOL SYSTEM
TRIMMER/EDGER MODEL ST250
UNPACKING AND ASSEMBLY
UNPACKING
WHAT'S IN THE BOX?
The trimmer/edger requires some
assembly before use These items ship
with the trimmer/edger:
• Trimmer/Edger
• Front handle
• Front handle clamping screw
• Guard with attachment screw
• Instruction manual
• Charger and power cord (if so equipped)
• Battery (if so equipped)
After removing the trimmer/edger
from the box, inspect it carefully to
ensure no damage has occurred during
shipping and that no parts are missing
If any parts are damaged or missing,
do not use the trimmer/edger Contact
OREGON® Cordless Tool System to obtain
replacement parts For country-specific
telephone numbers, see "Customer
service by country"
AE 0213 - F/N 558938
UNPACKING AND ASSEMBLY
ASSEMBLY
WARNING: REMOVE THE BATTERY
PACK FROM THE TRIMMER/EDGER
BEFORE ATTACHING THE GUARD
AND FRONT HANDLE. A BATTERY
OPERATED TOOL WITH THE BATTERY
PACK INSERTED IS ALWAYS ON AND
CAN START ACCIDENTALLY.
WARNING: DO NOT OPERATE
THE TRIMMER/EDGER WITHOUT
THE FRONT HANDLE AND GUARD
ATTACHED.
ATTACHING THE FRONT HANDLE
The front handle fits on the shaft at a
comfortable distance between the rear
handle and the trimmer motor housing
(Fig 4)
• Grip the front handle near the clamping
point (1)
• Snap the front handle onto the shaft
so that the clamp is nearest the rear
handle (2)
• Insert the front handle adjustment knob
through the hole on the front handle (3)
and tighten
FIG. 4
(3)
(1)
(2)
15

Publicité

loading