Palmer wupper Manuel D'utilisateur page 14

USER MANUAL
TECHNICAL DATA
GENERAL
Product number
Product type
No. of channels
Type
Transformer isolated
No. of inputs
Input type
Input connections
No. of outputs
Output type
Output connections
Ground/lift switch
Housing
Dimensions (H/W/D)
Weight
Ambient temperature for operation
Relative air humidity
Included accessories
AUDIO
Max. Input level ( < 1% THD, 20 Hz )
Max. Input level ( < 1% THD, 1 kHz )
Frequency response ( ±2dB, relative 1kHz )
Input impedance (1 kHz)
Output impedance (1 kHz)
THD ( 30 Hz, +4 dBu, unity,
THD ( 1 kHz, +4 dBu, unity,
IMD ( SMPTE) (60 Hz / 7 kHz, 4:1, +4 dBu )
Transformer ratio
All measurements were performed with a generator with 600 Ω output impedance and 20 kΩ balanced load.
EN
unweighted )
unweighted )
PWUPPER
Line Isolator
1
passive
yes
1
symmetrical/asymmetrical
6.3 mm jack
1
symmetrical/asymmetrical
6.3 mm jack
no
Aluminium continuous casting
110 x 50 x 50 mm
0.3 kg
-20°C...70°C
<80%, non-condensing
Rubber feet, inscription label
+10 dBu
+32 dBu
20 Hz - 20 kHz
17 kΩ
500 Ω
< 0.09 %
< 0.002 %
< 0.002 %
1:1
14