Niko 10-511 Mode D'emploi page 32

All manuals and user guides at all-guides.com
10-511 (-50)
Control function 8
program on function key 1
Press function key 1 in order
to put control function 8 on
the bus.
Floor door open function
switch on/off
After a call from the floor bell
push button, the door open key
of the apartment door automa-
tically opens for 30s. Program
control function 11 on a Niko
Access Control relay (10-830,
10-836 or 10-837) that can
open the apartment door.
Switching on a parallel
call
If an internal unit rings, every
internal unit that is program-
med in parallel also rings.
Switching off a parallel
call
Deleting the parallel program-
ming of an internal unit.
Choosing a ring tone for a
2nd external unit*
If you hear the desired ring
tone, wait for 8s. If you hear the
confirmation tone, the last heard
ring tone is programmed.
32
Pick up the receiver of the internal unit
(=MASTER) with which the other inter-
nal units must function in parallel.
Carry out the above actions on the
internal unit(s) (= SLAVE) that must
function in parallel.
Carry out the above actions on the
internal unit (= SLAVE) on which
the parallel programming must be
deleted.
EN