"MONTFORT" - ref. 134 05 01
3.2. Instructions for use with wood
3.2.1. Lighting
Figure 7
•
Slide the top air control (# B1) to the right. Open the
lower spin wheel (# C1).
•
Lay firelighters or rolled up newspapers on the grate
with a reasonable quantity, if necessary, of dry kindling
wood. Place 2 or 3 small logs on top.
•
Light the newspaper or firelighters using a long taper
and close the door.
•
When the fire is burning fiercely, add further logs of a
diameter up to 10 cms.
•
When the stove body is very hot, close the lower spin
wheel.
•
The burning rate can now be lowered by moving the
top air control to the left.
3.2.2. Re-fuelling
Figure 7
•
Slide the top air control (# B1) to the right. Open the
lower spin wheel (# C1).
•
Open the glass door and add logs.
•
Leave the lower spin wheel open for a few minutes to
allow the initial volatiles in the wood to burn.
•
Close the lower spin wheel.
3.3. Instructions for use with solid fuel
3.3.1. lighting
Figure 7
•
Slide the top air control (# B1) to the right. Open the
lower spin wheel.
•
Lay firelighters or rolled up newspapers on the grate
with a reasonable quantity, if necessary, of dry kindling
wood. Place a small quantity of solid fuel on top.
8
All manuals and user guides at all-guides.com
Figure 8 - Removing thefuel retainer
•
Light the newspaper or firelighters using a long taper
and close the door.
•
When the fire is burning fiercely, add further fuel.
•
When the stove body is hot, close the top air control by
sliding to the left.
•
The burning rate can now be adjusted by rotating the
lower spin wheel.
3.3.2. Re-fuelling
•
Open the lower spin wheel.
•
Open the glass door and add fuel.
•
Leave the lower spin wheel open for a few minutes to
allow the initial volatiles in the fuel to burn.
•
Adjust the lower spin wheel to the desired position.
O s c i l l a t i n g
g r a t e
Figure 9 - Mounting the oscillating grate and the
ash tray
Instructions for user
Technical manual "1171"