Publicité
Les langues disponibles
Les langues disponibles
EN
If the printer does not provide this voltage, then connect a standard 9 to 12 V
supply to the supply inlet (2) of the printer adapter plug (1).
Printer
•
Specifications of the interface:
7 data bits
1 parity bit, even parity
1 stop bit
9600 baud rate
•
How to transfer data to a PC:
1.
Select the correct data transfer setting on the PC.
- A short push of the "Print/Print all" key initiates the data transfer of the current
measuring value.
- A long push of the "Print/Print all" key initiates the data transfer of all data from
the memory of the DMA 35
2.
Disconnect the connector by pushing the catch spring on the rear and
simultaneously sliding back the connector.
3.
Received and processed by standard terminal software (like Windows
Procomm, Hyper Terminal, etc.).
36
All manuals and user guides at all-guides.com
N
to the PC.
power
DC
Terminal,
®
B46IB01
Publicité
