Anton Paar DMA 35N Mode D'emploi page 15

All manuals and user guides at all-guides.com
6.2 Turning On the Instrument
• Push the "ON/OFF" key for at least 2 seconds.
• The instrument performs a short self-test procedure, all required segments of
the display will light up.
• Subsequently, the °C (or °F) will start flashing, indicating that the instrument is in
the measuring mode.
6.3 Turning Off the Instrument
• Push the "ON/OFF" key until "OFF" appears on the display, then release the key.
• The DMA 35 is automatically switched off if no key is pushed for 15 minutes.
N
B46IB01
EN
17