Publicité
Les langues disponibles
Les langues disponibles
Playing Photo Contents
You can control the playback of photo content
located on a Blu-ray disc, DVD, CD, USB
device, or your computer.
Using the Tools menu
During playback, press the TOOLS button.
Start Slide Show/
Select to start or stop the slide
Stop Slide Show
show.
Slide Show Speed Select to set a slide show's speed.
Background
Select to listen to music while
Music
viewing a slide show.
Select to enlarge the current
Zoom
picture. (Enlarge up to 4 times)
Select to rotate the picture. (This
Rotate
will rotate the picture either
clockwise or counter clockwise.)
Information
Shows the picture information.
NOTES
✎
` Depending on the disc or storage device, the
Tools menu may differ.
` To enable the background music function, the
photo file must be in the same storage media
as the music file.
However, the sound quality can be affected
by the bit rate of the MP3 file, the size of the
photo, and the encoding method.
` You can't enlarge the subtitle and PG graphic
in the full screen mode.
18
All manuals and user guides at all-guides.com
Appendix
Before requesting service, please try the following solutions.
No operation can be
performed with the remote
control.
Disc does not play.
Disc Menu does not appear.
The prohibition message
appears on the screen.
Play mode differs from the
Setup Menu selection.
The screen ratio cannot be
changed.
No audio.
The screen is blank.
Troubleshooting
PROBLEM
• Check the batteries in the remote control. They may need replacing.
• Operate the remote control at a distance of no more than 20 feet from the
player.
• Remove batteries and hold down one or more buttons for several minutes
to drain the microprocessor inside the remote control to reset it. Reinstall
batteries and try to operate the remote control again.
• Ensure that the disc is installed with the label side facing up.
• Check the region number of the Blu-ray Disc/DVD.
• Ensure that the disc has disc menus.
• This message appears when an invalid button is pressed.
• The Blu-ray Disc/DVD's software doesn't support the feature (e.g., angles).
• You've requested a title or chapter number or search time that is out of range.
• Some of the functions selected in the Setup Menu may not work properly if
the disc is not encoded with the corresponding function.
• The Screen Ratio is fixed on your Blu-ray Disc/DVD.
• This is not a problem with the player.
• Make sure you have selected the correct Digital Output in the Audio Options
Menu.
• If the HDMI output is set to a resolution your TV cannot support (for example,
1080p), you may not see a picture on your TV.
• Press the @ button (on front panel) for more than 5 seconds with no disc
inside. All settings will revert to the factory settings.
• When the factory default settings are restored, all stored user BD data is
deleted.
SOLUTION
Publicité
