Flex ALP 305 Notice D'emploi page 15

ALP305
– Attachment to magnetic surfaces with the
installed magnets (12)
– Attachment to vertical or horizontal
pipes, posts, pillars, etc. with the
attachment belt supplied with the device
Note
To attach the device to the universal holder:
– Insert the pin (8) into the opening in the
device and secure with the fastening
screw (10).
All manuals and user guides at all-guides.com
Switching the power tool
on and off
Note
The switch (3) is both an On/Off switch and
a compensation clamp for the self-levelling
device.
Switch on the machine:
n Rotate the switch clockwise to
"UNLOCK".
.
Switch off the machine:
n Rotate the switch anti-clockwise to
"LOCK".
Operating the machine
n Attach the device to the universal holder.
n Switch on the machine.
The machine levels itself within the self-
levelling range (±3.5°).
Note
If the machine has been positioned at too
steep an angle (>3.5°), a warning signal
sounds and flashing laser beams are
displayed.
In this case:
n Move the machine into a more horizontal
position.
On completion of work:
n Switch off the appliance.
15