Samsung SCC-B5366 Manuel D'utilisation page 15

Installation
All manuals and user guides at all-guides.com
❶ Press the Locker button on the bottom of your camera and remove the Cover dome from the Main body
using the other hand. The Main body and Inner cover will be exposed to you.
❷ To install and adjust your camera, you have to fi rst remove the Inner cover. To remove the Inner cover from
the Main body, push a long thin screwdriver into the narrow spot of the Wing locker and press it outward to
remove the cover.
❸ Remove the Mount bracket from the Main body by rotating the Main body in the UNLOCK direction while
pushing the Lock releaser outward. If it is not easily done, rotate the Mount bracket in the LOCK direction
while holding small holes on the Mount bracket.
❹ Fix the Mount bracket to the location (ceiling or wall) with supplied three screws.

Note :
The CAMERA FRONT sign on the Mount bracket should face the camera monitoring area.
–
❺ Extend the wiring up to the ceiling or wall through the bracket.
❻ Now attach the Main body to the Mount bracket by rotating it in the LOCK direction after aligning the Groove
mark on the Main body with the wide groove around the CAMERA FRONT inlay.
❼ Adjust the camera direction. For more details on the direction control, see "Adjusting the camera direction,"
on the same page. When required to adjust the zoom and focus for your camera, see "Connecting cables
and changing the settings," on page 10.
❽ Attach the Inner cover to the Main body by pressing it until a "click" sound is heard after aligning two screw
holes on the Wing lockers of the Inner cover with two screw holes on the Main body's left and right sides.
❾ Finally attach the Cover dome to the Main body by pressing it until a "click" sound is heard after aligning the
bump inside the Cover dome with the Groove mark on the Main body.
12 – DIGITAL COLOR DOME CAMERA