Publicité
Les langues disponibles
Les langues disponibles
Guidance and manufacturer's declaration – electromagnetic immunity
The device is intended for use in the electromagnetic environments listed below,
and should only be used in such environments:
Immunity test
Electrostatic
discharge (ESD)
IEC 61000-4-2
Power frequency
(50/60 Hz)
magnetic field
IEC 61000-4-8
Electrical fast
transient/burst
IEC 61000-4-4
Surge
IEC 61000-4-5
interruptions and
voltage variations
on power supply
input lines
IEC 61000-4-11
15-0146 BPA-740-CA IM_v3--02.indd 31
All manuals and user guides at all-guides.com
IEC 60601
Compliance level
test level
± 6 kV contact
± 6 kV contact
± 8 kV air
± 8 kV air
3 A/m
3 A/m
± 2 kV for power
± 2 kV for power supply
supply lines
lines
± 1 kV for input/
± 1 kV for input/output
output lines
lines
± 1 kV line(s) to
± 1 kV line(s) to line(s)
line(s)
± 2 kV line(s) to earth
± 2 kV line(s) to
earth
<5 % UT
<5 % UT
(>95 % dip in UT)
(>95 % dip in UT)
for 0,5 cycle
for 0,5 cycle
40 % UT
40 % UT
(60 % dip in UT)
(60 % dip in UT)
for 5 cycles
for 5 cycles
70 % UT
70 % UT
(30 % dip in UT)
(30 % dip in UT)
for 25 cycles
for 25 cycles
<5 % UT
<5 % UT
(>95 % dip in UT)
(>95 % dip in UT)
for 5 sec
for 5 sec
Electromagnetic
environment –guidance
Floors should be wood, concrete
or ceramic tile. If floors are
covered with synthetic material,
the relative humidity should be at
least 30 %.
Power frequency magnetic fields
should be at levels characteristic
of a typical location in a typical
commercial or hospital environ-
ment.
Mains power quality should be that
of a typical commercial or hospital
environment.
Mains power quality should be that
of a typical commercial or hospital
environment.
Mains power quality should be that
of a typical commercial or hospital
environment. If the user of the de-
vice requires continued operation
during power mains interrup-
tions, it is recommended that the
device be
powered from an uninterruptible
power supply or a battery.
31
2015/10/28 下午5:45
Publicité
