HoMedics BPA-740-CA Manuel D'instruction Et Information Sur La Garantie page 16

1. If the cuff is not assembled, pass the end of the
2. Plug the cuff tube into the left side of the unit.
3. Open the arm cuff so that your arm may be placed
4. Remove tight fitting clothing from your upper left arm so
5. Position cuff edge 0.8-1.2
15-0146 BPA-740-CA IM_v3--02.indd 15
All manuals and user guides at all-guides.com
cuff furthest away from the tubing through the metal
D-ring in order to form a loop. The smooth side without
the felt material should be on the inside of the cuff loop.
End of cuff
D-ring
Insert plug here
through it.
that the cuff can be wrapped around your exposed arm.
inches (2-3 cm) above elbow.
15
2015/10/28 下午5:45