Publicité
E N G L I S H
Please read the following instructions before using your new Andis
clipper. Give it the care that a fine precision built instrument
deserves and it will give you years of service.
IMPORTANT SAFEGUARDS
When using an electrical appliance, basic precautions
should always be followed, including the following: Read
all instructions before using your Andis clipper.
DANGER:
To reduce the risk of electric shock:
1. Do not reach for an appliance that has fallen into water.
Unplug immediately.
2. Do not use while bathing or in a shower.
3. Do not place or store appliance where it can fall or be
pulled into a tub or sink. Do not place in or drop into
water or other liquid.
4. Always unplug this appliance from the electrical outlet
immediately after using.
5. Unplug this appliance before cleaning, removing, or
assembling parts.
WARNING:
To reduce the risk of burns, fire,
electric shock, or injury to persons:
1. An appliance should never be left unattended when
plugged in.
2. Close supervision is necessary when this appliance is
used by, on or near children or individuals with certain
disabilities.
3. Use this appliance only for its intended use as
described in this manual. Do not use attachments not
recommended by Andis.
4. Never operate this appliance if it has a damaged cord
or plug, if it is not working properly, if it has been
dropped or damaged, or dropped into water. Return
2
All manuals and user guides at all-guides.com
10. WARNING: During use, do not place or leave
SAVE THESE INSTRUCTIONS
THIS PRODUCT INTENDED FOR HOUSEHOLD USE
To reduce the risk of electric shock, this appliance has a polarized plug (one
blade is wider than the other). This plug will fit in a polarized outlet only one
way. If the plug does not fit fully in the outlet, reverse the plug. If it still
does not fit, contact a qualified electrician to install the proper outlet.
Do not change the plug in any way.
OPERATING INSTRUCTIONS
Before starting clipper remove blade guard. Plug cord into electrical outlet,
operate at 120 volt, 60 cycle AC electrical current or as noted on the unit.
To start clipper move switch button forward; to stop, move switch button
back to original position. After using your Andis clipper, rewrap cord and
store in a safe place.
USING THE ATTACHMENT COMBS
(Some models do not have combs and sizes will vary by kit)
You can set the blades for a longer cut by using any of the attachment
combs made for your Andis clipper. The combs mount easily; simply slip the
cutter blade teeth into comb and snap the comb down. To remove, simply
snap off (Figures A & B). These attachment combs guide hair into the blades
the appliance to an Andis authorized service station for
examination or repair.
5. Keep the cord away from heated surfaces.
6. Never drop or insert any object into any opening.
7. Do not use outdoors or operate where aerosol (spray)
products are being used or where oxygen is being
administered.
8. Do not use this appliance with a damaged or broken
blade or comb, as injury to the skin may occur.
9. To disconnect turn control to OFF then remove plug
from outlet.
appliance where it may be (1) damaged by an animal
or (2) exposed to the weather.
3
Publicité
