Publicité
Les langues disponibles
Les langues disponibles
English
3)
Electromagnetic interference or
fault. Take the battery out of the
power tool and refit it. Switch on the
machine – if the LEDs continue to
flash, the battery has a malfunction
and must be replaced.
4)
Electromagnetic interference or
fault. Take the battery out of the
machine. Use a blunt tool to
remove dirt from the contacts in the
battery compartment. Refit the
battery. Switch on the power tool –
if the LEDs still flash, the power tool
has a malfunction and must be
checked by a servicing dealer –
STIHL recommends an authorized
STIHL servicing dealer.
14
All manuals and user guides at all-guides.com
Light Emitting Diodes (LED)
on Charger
1
The LED (1) on the charger may glow
continuously green or flash red.
Green continuous light ...
... indicates the following:
The battery
is being charged
–
is too hot and must cool down
–
before charging
See also "LEDs on battery".
The green LED on the charger goes off
as soon as the battery is fully charged.
Red flashing light ...
... may indicate the following:
No electrical contact between
–
battery and charger – remove and
refit the battery
Malfunction in battery – see also
–
"LEDs on Battery".
Malfunction in charger – have
–
checked by a servicing dealer.
STIHL recommends an authorized
STIHL servicing dealer.
Switching On
When delivered, the battery is not fully
charged.
It is advisable to charge the battery
completely before using it for the first
time.
Insert the battery
Open the battery compartment
Press the retaining lug (1) slightly in
N
and fold out the cover (2) to the
back
Insert the locking key
The engine can only be started if the
locking key is inserted.
3
4
Push the locking key (3) as far as it
N
will go into the base (4)
2
1
RMA 370
Publicité
