Fox EURO EASY DOME t3 Instruction Pour Le Montage page 3

GB
About your
This leaflet details some of the things
you should know about your T3. The
T3 is manufactured from the highest
quality 420D/6oz Nylon with a
5000mm Hydrostatic Head. The
mechanism is based on the best selling Euro Easy Dome and provides extremely
fast set up and rapid breakdown, avoiding the need to thread poles. Treated
properly and maintained correctly, it will provide you with outstanding performance
season after season. The following pages detail assembly and care of your T3.
2
All manuals and user guides at all-guides.com
T3 Material
1. All fabrics are affected by temperature. For example, the
amount of moisture in the air or the colder the temperature,
the worse the condensation will become and the harder it will
be for the material to deal with it.
2. Cold, damp conditions will cause the material to go slack,
whilst hot/dry temperatures will cause the material to tighten.
This is normal.
3. To maintain its performance, we recommend that the cover is
treated with a reputable re-proofing agent specifically
designed to be compatible with PU coated nylons. When it
needs doing is really a matter of how often you use your T3.
As a rule of thumb, any water should 'bead up' and
run off rather than soaking into the material.
GB
Maintenance of
my T3
How do I store my T3?
You should ensure the T3 is dry
before being stored away. If this
was not possible at the end of
your session, you should allow it
to dry out thoroughly when you
get home.
PU Groundsheet
To compliment your T3, a heavy
duty PU groundsheet is supplied in
a nylon sleeve for protection and
storage.
3