ROSIERES RHP67000/1LIN/1 Manuel D'instructions page 6

5. Put the cooker hood on the hook. See Pic 4.
6. Adjust the height of the inside chimney to the position of the inside chimney bracket
and fix on it by screw, after adjusting the position, fix the body with safety screw.
See Pic 5.
Note: The two safety vents are positioned on the back housing, with diameter of
6mm.Lay the expansion pipe to the wall outlet. Fix the expansion pipe with the cable
tie (1) on the wall-outlet if it is aluminium foil pipe.
MOUNTING OF THE V-FLAP
Note:
The following models include the v-flap: RHP67000/1LIN/1, RHP67000/1LPN/1,
RHP97000 /1LIN/1, RHP97000/1LPN/1
If the cooker hood does not have an assembled V-flap 1, you should mount the half-
parts to the its body.
To mount the V-flap 1 you should:
• Mount two half-parts 2 into the body 6
• a pin 3 should be top oriented;
• the axis 4 should be inserted in the holes 5 on body;
• repeat all the operations for the 2nd half-part
Expansion pipe
Outside chimney
6
Inside chimney
Outside chimney bracket
Safety screw
Cable tie