Publicité
Les langues disponibles
Les langues disponibles
GREASE MESH FILTERS
The mesh filters can be cleaned either by hand or in the dishwasher. After cleaning
ensure that the filters are completely dry before refitting.
- By hand: Soak them for about 3 minute in water with a grease-loosening detergent
then brush it gently with a soft brush. Please do not apply too much pressure, avoid to
damage it . (Leave to dry naturally out of direct sun light)
- In a dishwasher: Ensure that placement of the filters is made so as to not impede the
function of the spray arm. Washing the filters in a dishwasher may cause discoloration
of the aluminum inner mesh over time although it will not affect their performance.
Filters should be washed separately to crockery and kitchen utensils. it is advisable
not to use rinse aid.
Oil soot filter mesh
Oil soot filter mesh
INSTALLING GREASE MESH FILTERS
- To install filters for the following four steps (See pic below):
- Angle the filter into slots at the back of the hood.
- Push the button on handle of the filter.
- Release the handle once the filter fits into a resting position.
- Repeat to install all filters.
11
Publicité
