Publicité
Les langues disponibles
Les langues disponibles
BULB REPLACEMENT
Important :
1. Switch the unit off and pull out the plug first.
2. Wait until the light bulb is cooled down before replacement.
3. Take out the baffle filter and use the screw driver to take out the frame as the below
pic showed
4. Replace with same type of bulb
Note：Light replacement should carried out by qualified service personnel only.
• ILCOS D code for this lamp is: DSR-1.5/65-S-64
– LED modules –round lamp
– Max wattage: 2 *1.5W
– Voltage range: DC 12V
– Dimensions:
The bulb must be replaced by the manufacturer, its
service agent or similarly qualified persons.
Always switch off the electricity supply before
carrying out any operations on the appliance. When
handling bulb, make sure it is completely cool down
before any direct contact to hands.
When handling globes hold with a cloth or gloves to
ensure perspiration does not come in contact with
the globe as this can reduce the life of the globe.
13
Publicité
