Publicité
Les langues disponibles
Les langues disponibles
13. Keep hands and utensils out of the jar and away from the cutting
blade, while blending or chopping food, to reduce the risk of severe
personal injury and/or damage to the blender (attachments may not be
provided with blender). A rubber spatula may be used but only when
blender is not running.
14. Blades are sharp; handle carefully—especially when assembling,
disassembling, emptying or cleaning blender jar.
15. Do not use a broken, chipped, or cracked blender jar.
16. Do not use broken, cracked, or loose cutting blade assembly.
17. Always operate blender with cover in place.
18. Do not use appliance for other than intended purpose.
19. Do not leave blender unattended while it is operating.
20. Check that the appliance is OFF ( ) before plugging cord into wall
outlet. To disconnect, turn the control to OFF ( ); then remove plug from
wall outlet. To unplug, grasp the plug and pull from the outlet. Never pull
from the power cord.
21. CAUTION! In order to avoid a hazard due to inadvertent resetting of the
thermal cut-out, this appliance must not be supplied through an external
switching device, such as a timer, or connected to a circuit that is
regularly switched on and off by the utility.
22. If the jar should twist or rotate when the motor is switched ON, switch
OFF ( ) immediately and tighten jar in collar or on blender base.
23. Ensure cutter assembly is tight and secure to jar. Injury can result if
moving blades accidentally become exposed.
24. Do not blend hot liquids.
25. To reduce the risk of injury, never place cutting blade assembly on base
without jar properly attached.
SAVE THESE INSTRUCTIONS
3
Publicité
