Publicité
Les langues disponibles
Les langues disponibles
All manuals and user guides at all-guides.com
Telescoping Pole
Keyslots
Cover Assembly screw
electrical
Cover
FIGurE 6
16. Install the fourth Cover Assem-
bly Screw. Tighten all four Cover
Assembly Screws to attach the
Electrical Cover to the bottom
of the Cast Iron Base.
17. Hold the wall plug out of the
way and stand the fan upright.
18. Remove the upper left Grille
Mounting Screw from the Mo-
tor Face. See Figure 7.
upper left Grille
Mounting screw
flat Portion
Motor shaft
Grille Mounting screws
FIGurE 7
41973-01 03/08/2006
19. Loosen the three remaining
Grille Mounting Screws. Align
Base
the three keyhole slots in the
Back Grille with the three re-
wall
maining Grille Mounting Screws
Plug
in the Motor Face, and place the
Back Grille onto the Motor Face,
ensuring that the Grille Mount-
ing Screw washers are between
the screw head and the Back
Grille. See Figure 8.
20. Rotate the Back Grille clockwise
to situate the screws in the nar-
row ends of the keyhole slots.
21. Reinstall and tighten the Up-
per Left Grille Mounting Screw
and tighten the three remaining
Grille Mounting Screws.
FIGurE 8
continued
Publicité
