Publicité
Les langues disponibles
Les langues disponibles
All manuals and user guides at all-guides.com
NOTE: Assembly of this fan will be
easier if performed by two people.
1. Loosen the Height Adjustment
Grip on the Telescoping Pole
by turning it counterclockwise.
See Figure 3. note: To prevent
the plug from dropping into the
Telescoping Pole, grasp the plug
before you raise the Telescoping
Pole. Raise Telescoping Pole ap-
proximately 10 inches. Turn the
Height Adjustment Grip clock-
wise to set the height of the
Telescoping Pole.
2. Remove the Motor Mount Set-
screw (pre-loaded and tagged)
and set it aside for later reinstal-
lation. See Figure 3.
3. Connect the plugs coming from
the bottom of the Motor Mount
and the top of the Telescoping
Pole. See Figure 4.
front
Grille
Grille
ring
41973-01 03/08/2006
aSSembly
4. Insert the threaded portion of
the Telescoping Pole into the
Motor Mount. See Figure 3.
Turn either the Fan Motor or the
Telescoping Pole to tighten the
joint, then re-install the Motor
Mount Setscrew to secure the
Fan Motor to the Telescoping
Pole.
Back
Blade
Grille
Assembly
Motor
face
Motor Mount
setscrew
(pre-loaded
and tagged)
FIGurE 3
FIGurE 4
interlock Bracket
fan
Motor
Motor
Mount
Telescoping
Pole
Height
Adjustment
Grip
continued
Publicité
