Kenwood HM-L700 Manuel D'instructions page 17

Playback of CD
When a disc is placed into the CD player in advance, the unit will be switched on automatically by pressing
the CD 6 key, and playback will start.
Start playback/ To pause playback
Skipping tracks
Playback from
desired track
Load CD
with label
facing the
front.
2 2
1 1
To stop
playback
To fast
forward and
backward
1. Load a disc.
Press the door open/close key to open the door and carefully insert
the CD into the center of the CD slot. Once the CD has been inserted
halfway, it is automatically drawn into the CD player automatically.
• Do not touch the play side of the CD.
• When a CD is loaded into the CD player, the CD indicator on the front panel of
the main unit lights up. If the CD indicator is lit, eject the current CD before
attempting to load another one.
• Particularly with 8 cm CDs, the CD is not automatically drawn into the CD
player if the CD is not at the center of the CD slot when loaded.
• If the CD player does not draw the CD in, pull the CD out and try loading it
again.
When on standby, CDs cannot be loaded or ejected.
Do not force CDs in or out of the CD player when on standby. Doing so
can damage the CD and CD player.
2. Start playback.
÷ After a few seconds, play
starts from track No.1.
When playback starts, the
door closes automatically.
÷ Titles are displayed with
CD-TEXT discs.
Start playback/ To pause playback
2 2
Elapsed time of track being played
Basic use method
Eject the CD
CD indicator
To stop playback
Skipping tracks
Track No. being played
17 EN