Beyerdynamic XELENTO WIRELESS Manuel page 17

Xelento wireless – In-Ear Headphones
Setting up multi-point
• Pair the Xelento wireless with the first device (refer to
"pairing with the player").
• Deactivate the Bluetooth
• Switch the Xelento wireless off.
Press the button b for 6 seconds to start pairing mode
•
(LED d flashes slowly alternating blue and red).
• Pair the Xelento wireless with the second device (refer to
"pairing with the player").
• Re-activate the bluetooth connection to the first device
that automatically connects to the Xelento wireless.
• Once both devices are paired with the Xelento wireless,
the Xelento wireless automatically connects with both
devices each time it is powered up.
Using multi-point
If you have paired the Xelento wireless with two devices
– and have just activated media playback, briefly press
the multifunction button b once to answer an incoming
call.
– and have just hung up on a phone call, briefly press the
multifunction button b once to start playing the media
which was played most recently.
®
connection on the first device.
17