Beyerdynamic XELENTO WIRELESS Manuel page 15

Xelento wireless – In-Ear Headphones
• Select "beyerdynamic Xelento wireless" under the
available devices in the Bluetooth
and pair both devices. When in range, both devices are
paired automatically each time you turn them on.
Alternatively, you can pair the Xelento wireless with an NFC-
enabled player via NFC. Please note that the Xelento wireless
must be turned on.
• Activate the NFC function in your player so that all
necessary information can be transferred to the player
and pairing can be established.
• Hold the player closely over the rear of the remote control
of the Xelento wireless.
• Now both devices will automatically be paired.
Pairing and clearing the list of players
If there are already several players in the list of your Xelento
wireless and your Xelento wireless cannot be paired with
another new player, the list is full and should be cleared so
that the new player can be added.
This is how to clear the list:
Hold down the button b of the turned off Xelento wireless
•
for more than 10 seconds, so that the Xelento wireless will
switch into the pairing mode and clear the list of players
simultaneously.
a
b
c
®
menu of your player
d
15