Publicité
Les langues disponibles
Les langues disponibles
TO ADJUST YOUR CLIPPER'S POWER SCREW
1. Oil the blades.
2. The power screw is located in the lower part of the housing opposite the switch
(Figure D).
3. Turn your clipper ON.
4. Using a standard flathead screwdriver that fits the slot, turn the power screw
clockwise until the clipper clatters continuously. Then turn the screw
counterclockwise carefully until the clatter ceases.
5. Your clipper is now adjusted to its optimum power setting.
BLADE TEMPERATURE
Due to the high speed nature of Andis clippers, please check for blade heat often,
especially on close cutting blades. If blades are too hot, dip the blades only into
Andis Blade Care Plus or apply Andis Cool Care Plus and then Andis Clipper Oil.
CARE AND SERVICING OF YOUR ANDIS CLIPPER BLADES
The blades should be oiled before, during, and after each use. If your clipper blades
leave streaks or slow down, it's a sure sign the blades need oil. The clipper should be
held in the position shown in Figure D to prevent oil from getting into motor. Place a
few drops of Andis Clipper Oil on the front and side of the cutter blades (Figure E).
Wipe excess oil off the blades with a soft, dry cloth. Spray lubricants contain
insufficient oil for good lubrication, but are an excellent clipper coolant. Discontinue
use of broken or nicked blades to prevent injury. You can clean the excess hair from
your blades by using a small brush or an old toothbrush. To clean the blades we
suggest immersing the blades only into a shallow pan of Andis Blade Care Plus
while the clipper is running. Any excess hair and dirt that has accumulated between
the blades should come out. After cleaning, turn your clipper off, dry the blades with
a soft, dry cloth, and start clipping again.
CLIPPER REPAIR SERVICE
If you wish your clipper to be serviced, it should be carefully packed and mailed
either Parcel Post Insured, or U.P.S. to any Andis authorized service station. To find
an Andis authorized service station near you, log on to andis.com or contact
our customer service department at 1-800-558-9441.
6
Publicité
