Programmed Start Up
•∙∙ T he∙Programmed∙Start∙up∙mode∙is∙used∙in∙conjunction∙with∙the∙timer∙feature.∙Once∙the∙timer∙feature∙is∙completed∙(eg.∙timer∙set∙to∙3∙hours∙expires),∙the∙Programmed∙Start∙Up
feature settings would then activate.
•∙The∙example∙below∙shows∙the∙Portable∙Air∙Conditioner∙unit∙being∙set∙at∙25∙degrees∙and∙the∙fan∙set∙to∙high∙speed∙once∙the∙timer∙program∙feature∙ends.
•∙Press∙"ON/OFF"∙button∙to∙switch∙into∙STANDBY.
•∙Press∙the∙"∙
" button twice, the time is displayed and "
•∙Set∙the∙time∙when∙you∙want∙the∙unit∙to∙switch∙off∙using∙the∙"∙ ∙"∙buttons∙(from∙30∙minutes∙to∙24hours)
•∙During∙the∙first∙ten∙hours∙you∙can∙select∙half∙intervals.∙For∙times∙longer∙than∙ten∙hours,one∙hour∙intervals∙can∙be∙selected.
•∙Press∙the∙"∙
" button again to confirm the setting, the TIMER symbol light "
•∙At∙the∙end∙of∙the∙set∙time∙the∙unit∙switches∙on∙automatically∙and∙operates∙in∙the∙same∙working∙mode∙as∙prior∙to∙switching∙into∙STANDBY.
•∙To∙cancel∙the∙TIMER∙setting.∙press∙the∙"∙
Self-dIaGnoSIS
The appliance has a self diagnosis system to identify a number of malfunctions. Error messages are displayed on the appliance display.
If is displyed
What should i do?
The unit is fitted with a frost protection device to
avoid∙excessive∙formation∙of∙ice.∙
The unit starts up again automatically when the
defrosting, process is completed.
ARP-8085CA manual.indd 14
" symbol.
" on control panel light up to indicate the timer is activated.
" button again.
low teMpeRatuRe
(frost∙prevention)
Should this symbol appear, contact your local
authorized∙service∙centre.
pRobe faIluRe
(sensor∙damaged)
14
full tank
(safety∙tank∙full)
Empty the internal safety tank, following
the instructions in the "End of season
operations" paragraph.
2014-1-17 11:02:19