Publicité
Les langues disponibles
Les langues disponibles
Measuring Functions
Simple Length Measurement
For length measurements, briefly press button
measuring tool, the "length measurement" indication "
display. And then press it again to activate the laser beam, briefly press the
same button third time to get the result value.
–
The measured value is displayed in the result line.
–
For several subsequent length measurements, the last measured results
are displayed in the measured-value lines.
Continuous Measurement (Tracking)
In continuous measurement, the laser tape measure can be moved relative
to your target, and the measuring value is updated approx. every 0.5
seconds. You can move away from your target, while the actual distance can
always be read in time.
For choosing continuous measurements, press the button
until the "MAX & MIN" indication appears on LCD and the laser beam flashes
to get values continuously.
–
The current measured value will be displayed in the result line.
–
MAX/MIN（Maximum/Minimum value）: All measured values are
automatically saved, in which the maximum value and the minimum value
will be displayed directly in the measured-value lines.
–
Pressing the measuring button
to end the continuous measurement. The last measured value is
displayed in the result line.
–
Continuous measurement automatically switches off after 150 seconds.
MEAS
or the wheel measuring button
MEAS
- 05 -
once to switch on the
" appears on the
for seconds
MEAS
once
Publicité
