Information Panel - Handicare EvaDrive Manuel Utilisateur

Information panel

Red indicator light
Service required
Yellow indicator light
Wheel turning activated
Green indicator light
Low speed activated
Low speed button
Red indicator light - Solid red light indicates that service is required. Blinking at the same time as
one of the lights on the battery scale: error code, see troubleshooting. Blinking at the same time
as the lights on the battery scale are not on indicates that the battery must be charged.
Yellow indicator light - Solid light indicates rear wheels are turned. The lift can then only be moved
sideways. Light turned off indicates that the rear wheels are in normal position and the lift can be
driven forward/backward.
Green indicator light - Solid light indicates low speed. Blinking indicates the need for calibration.
(Switch off, wait fot 10 seconds and swich back on.) No light, normal condition.
Battery level - Solid light indicates battery capacity remaining. Blinking light indicates error. A
service technician can determine the source of the error.
Power button - Press lightly to activate EvaDrive. (Wait about 2 seconds before operating.)
Press again to deactivate EvaDrive.
Low speed button - Press once to set the system for low speed (green light switches on); press
again to resume normal operation (light switches off).
Rear wheel direction controls - Press the left button to set the rear wheels at an optional angle.
Press the right button to resume normal wheel setting. Motion ceases as soon as pressure on
the buttons is released.
10
Rear wheel direction controls
Battery level
indicator
Power button
I N S T R U C T I O N S F O R U S E