SAINT-GOBAIN Norton Clipper JCW 600 Manuel D'utilisation page 25

VERS. 2017.07.12
1 BASIC SAFETY INSTRUCTIONS
The JCW 600 is exclusively designed for the cutting of construction products mainly on construction
sites.
Uses other than the manufacturer's instructions shall be considered as contravening the regulations.
The manufacturer shall not be held responsible for any resulting damage. Any risk shall be borne
entirely by the user. Observing the operating instructions and compliance with inspection and
servicing requirements shall also be considered as included under use in accordance with the
regulations.
1.1 Symbols
Important warnings and pieces of advice are indicated on the machine using symbols. The following
symbols are used on the machine:
Read operator's instructions
Hand protection must be worn
Danger: risk of cut
JCW 600 E_MAN_EN
Ear protection must be worn
Eye protection shall be worn
Rotation direction of the blade
5