Publicité
Les langues disponibles
Les langues disponibles
TROUBLESHOOTING
Problem
Blender does not work after
installation, red light flashes
The mixer does not work
and the red light turns on
for 5 seconds.
Automatically stops
when running
Red and white light flash
alternately 10 seconds
during working
Leak
Fume
MAINTENANCE AND CLEANING
To clean, take special care with the blades, as they are sharp.
It is advisable to clean the appliance regularly and remove food residues. You can use a damp cloth to clean
the body of the mixer, avoid getting water inside the button and USB slot. For the glass and the lid, you can
use plain water.
If the appliance is not cleaned and maintained properly, the surface may deteriorate, which will inevitably
a ect the life of the appliance and may lead to dangerous situations.
The di erent parts of the appliance can be washed in the dishwasher: bottle and lid.
16
Analysis
Cap and bottle are not
properly adjusted
The batteries are running out
of power or are already empty.
Not enough food
The motor locked
Silicone ring is not in place
Continue working for a long time,
automatic overheat protection
Solution
Screw the bottle on properly
by turning clockwise
Charge the batteries
through the USB port.
Add more food or liquid
and start over.
Remove stuck hard
objects and restart
lease install silicone
ring in place again
Let the machine cool down
30 to 60 minutes and restart
Publicité
