Publicité
Les langues disponibles
Les langues disponibles
After 30 seconds of no button operation, it
will automatically enter the locked state,
and the external display board with a
music buzzer will sound the lock buzzer at
the same time.
The alarm sound release operation can be
carried out in the locked state, and all other
key operations must be carried out in the
unlocked state.
If the operation is in the locked state, an
error buzzer will be displayed.
•
Temperature setting of refrigerating
chamber
Click the button
temperature of refrigerating chamber, each
click of temperature adjusting button of the
refrigerating chamber, the set temperature
will be reduced 1°C.
The temperature setting range of
refrigerating chamber is 2°C ~ 8°C. When
the set temperature is 2°C. Click the button
again, the set temperature of refrigerating
chamber will switch to 8°C.
•
Temperature setting of freezing
chamber
Click the button
temperature of freezing chamber, each
click of temperature adjusting button of the
freezing chamber, the set temperature will
be reduced 1°C. The temperature setting
range for freezing chamber is -24 ~ -16°C.
When the temperature is -24°C, click the
button again, the set temperature of
freezing chamber will switch to -16°C.
Vacation mode
•
Long press the refrigeration temperature
adjustment button (3s) to set/cancel the
holiday mode.
When setting the holiday mode, the
refrigeration is turned off, the refrigeration
temperature display area is extinguished,
and the freezing is automatically set to -18°
C; Adjusting the refrigeration/freezing/
super cool and super freezer buttons will
exit the holiday mode.
•
When exiting the holiday mode, the
refrigeration set temperature will
automatically return to the set temperature
before the holiday mode; the freezing set
temperature will automatically return to the
set temperature before the holiday mode;
enter the normal operation mode.
to change the set
to change the set
Super freeze mode
•
Super cool and super freezer mode, press the
button,
cool -> super freezer -> cancel.
When setting/cancelling the super cool mode,
the corresponding super cool icon is on/off.
When setting the super cool mode, the
refrigeration is automatically set to 2°C.
When exiting the super-cool mode, the set
temperature of the refrigerating room will
automatically return to the set temperature
before the quick-cooling mode.
When the super-freezer mode is set, the
corresponding super-freezer icon is lit.
•
When the super-freezer mode is set, the
freezing is automatically set to -24°C;
When exiting the super-freezer mode, the set
•
temperature of the freezer compartment will
automatically return to the set temperature
before the super-freezer mode;
Super cool mode automatically disabled for 6H.
•
•
Super freezer mode automatically disabled for
24H.
Recommended setting: Refrigerated chamber 4°C,
freezing chamber -18°C.
NOTE
The quick-freezing function is designed to maintain
the nutritional value of the food in the freezer. It can
freeze the food in the shortest time. If a large amount
of food is frozen at one time, it is recommended that
the user turn on the quick-freezing function and put
the food in. At this time, the freezing speed of the
freezer compartment is increased, which can quickly
freeze the food, effectively lock the nutrition of the
food, and facilitate storage.
Opening warning and alarm control
•
If the refrigerator door is open for 120 seconds
without closing, the buzzer will alarm until the
refrigerator door is closed; any key will cancel the
buzzer alarm.
Fault indication
The following warnings appearing on the display
indicate corresponding faults of the refrigerator.
Though the refrigerator may still have cold storage
function with the following faults, the user shall
contact a maintenance specialist for maintenance, so
as to ensure optimized operation of the appliance.
Fault
Fault Description
Code
E1
Temperature sensor failure of refrigerating chamber
E2
Temperature sensor failure of freezing chamber
E3
Temperature sensor failure of meat & fish zone
E5
Freezing defrost sensor detection circuit error
E6
Communication error
E7
Ambient temperature sensor error
13
the setting sequence is: super
V.2
Publicité
