Uline H-9889 Instructions D'installation page 6

1. Align side panel to the upright side and hold
in place.
2. With second person, feed U-bolts through the
side panel mesh to attach to the upright.
3. Use two U-bolts each on the bottom, middle and
top upright support bars. Use one U-bolt along the
upper diagonal support bar. (See Figure 18)
Figure 18
Middle Upright
Support Bar
NOTE: Threaded ends of the U-bolts should
face inside of the enclosure. (See Figure 19)
NOTE: Use seven U-bolts per side panel.
4. Slide one bracket onto each U-bolt.
5. Secure U-bolt nuts and bracket onto the U-bolt using
wrench. Use two U-bolt nuts per U-bolt. (See Figure 20)
6. Repeat steps 1-5 for second side panel.
PAGE 6 OF 18
Side Panel x 2
SIDE PANEL ASSEMBLY
Top Upright
Support Bar
Upper Diagonal
Support Bar
Bottom Upright
Support Bar
SIDE PANEL PARTS
U-Bolt x 14
Figure 19
Figure 20
1-800-295-5510
uline.com
U-Bolt Nut x 28 U-Bolt Bracket x 14
U-Bolt Nut
Bracket
Side Panel
Bracket
Inside View
U-Bolt
U-Bolt
0422 IH-9889