Uline H-8324 Mode D'emploi

H-6896, H-8324
H-9058, H-10490
SINGLE TIER
BULK STORAGE LOCKERS
TOOLS NEEDED
10 mm Wrench Phillips Screwdriver
and 1/2" Wrench
Door and Frame Side Panel
Anchor for Long Hex Head Bolt
Floor Mounting (for Add-On Unit)
STARTER UNIT ASSEMBLY
1. Place door frame on a protected flat surface, with
door opening facing down. (See Figure 1)
Figure 1
2. Bolt first side panel to door frame by inserting
four short hex head bolts through side panel into
threaded holes in door frame circled. Repeat for
other side panel. (See Figure 2)
PAGE 1 OF 12
1-800-295-5510
uline.com
Power Drill 5/16" Masonry
Drill Bit
PARTS
Screw for
Wall Mounting
Short Hex Head
Bolt
ASSEMBLY
Door Frame
Hammer
(Optional)
# DESCRIPTION
1 Door Frame and Door
2 Side Panel
3 Short Hex Head Bolt
4 Long Hex Head Bolt
5 Anchor for Floor Mounting
6 Screw for Wall Mounting
NOTE: There may be hardware left over after
assembly, as hardware can be used for multiple
items and accessories.
Figure 2
Side Panel
3. Tighten all bolts fully, and carefully stand unit upright.
NOTE: It is recommended that lockers are
anchored to wall or floor for stability.
Para Español, vea páginas 5-8.
Pour le français, consulter les pages 9-12.
STARTER UNIT ADD-ON UNIT
QTY. QTY.
1
2
8
N/A
6
8
Door Frame
0823 IH-6896
1
1
4
3
4
4