1. Attach upper left door hinge (LR/UL) to upper
left-hand corner of left door panel. (See Figure 5)
NOTE: Hinge hole should face down.
Figure 5
Door Panel
Upper Left
Door Hinge
2. Secure hinge to door panel using 1/4 x 2"
carriage bolt and 1/4" nut. (See Figure 6)
NOTE: Bolt should face the inside of enclosure.
Figure 6
1/4 x 2"
Carriage Bolt
3. Attach lower left door hinge (UR/LL) to lower
left-hand corner of left door panel. (See Figure 7)
NOTE: Hinge hole should face up.
Figure 7
Door Panel
Hinge Hole
Lower Left
Door Hinge
4. Repeat step 2.
PAGE 3 OF 18
DOOR ASSEMBLY
5. Attach upper right door hinge (UR/LL) to upper
6. Repeat step 2.
7. Attach lower right door hinge (LR/UL) to lower
1/4" Nut
8. Repeat step 2.
right-hand corner of right door. (See Figure 8)
NOTE: Hinge hole should face down.
Upper Right
Door Hinge
right-hand corner of right door. (See Figure 9)
NOTE: Hinge hole should face up.
Hinge
Hole
Lower Right
Door Hinge
Figure 8
Door Panel
Figure 9
Door Panel
0422 IH-9889